Convert decimal geographic coordinates to degrees, to UTM and draw in AutoCAD

This Excel template is initially made to convert geographic coordinates into UTM, from decimal format to degrees, minutes and seconds. Just what Contrary to the template we had previously done, As seen in the example:

• He concatenates them in a chain
• Converts them to coordinates UTM, With option to choose a Datum
• Concatenate the dot command to create points in AutoCAD with a single Copy / paste
• Concatenate the polyline command to draw the traverse with a Copy / paste

How the operation of converting geographic coordinates into UTM is done:

• To condition the input fields, you place properties on the cells. This is done with the Data tab, in the data validation option. We choose that there only support decimal data between -180 and 180 which is the maximum that supports the lengths. And then the error message indicates that the data is not allowed. In the case of latitudes, it is indicated between -90 and 90.
• To choose the hemisphere in lengths, which are in column G, the cell conditions, that if the coordinate is negative the W text is written, if positive text is placed E.

This is done with the formula = YES (G37 <0, »W», »E»)

• Similarly with the latitudes in column H, if the coordinate is negative, write the letter S, if it is positive N.

The formula will be = YES (H37 <0, »N», »S»)

• To extract the degrees, the absolute value is used and the number is truncated to zero decimals = ABS (TROUBLE (G37,0)) In this way, a -87.452140 will be converted to 87
• To extract the minutes, the original value of the truncated value is subtracted, so that only the decimals remain (0.452140) and that value is multiplied by 60, which is the total number of minutes in a degree. It is truncated to zero decimal places and thus it is obtained that in 0.452140 there are 27 minutes = TRUNC ((ABS (G37) -J37) * 60,0)
• To obtain the seconds, multiply the decimals (0.452140) by 3600 which is the number of seconds in a degree (60 × 60), and subtract what we have already subtracted, which are the minutes (27) multiplied by 60. Then rounding is applied, with a reference cell where the number of decimals is so that it can be adjusted to taste. So you have that there are 7.704 seconds. =REDONDEAR((((ABS(G37)-J37))*3600)-(K37*60),\$L\$5)
• To concatenate the point command, the _point string is applied, so that only the cells are copied to the AutoCAD command line = CONCATENATE («_ point«, ROUND (S37,2), »,», ROUND (T37,2)). Similarly, the polyline command = CONCATENATE («_ pline«, ROUND (S37,2), »,», ROUND (T37,2)). Rounding is applied so that chains are not too long.

In the template there are some tips to execute this last action.

From here you can download the template, paying with Credit card or Paypal.

16 Replies to "Convert decimal geographic coordinates to degrees, to UTM and draw in AutoCAD"

1. tell me, what is happening strange.

2. denis says:

Dear the conversion to UTM is not correct, values ​​are not correct, please help if I am doing something wrong

3. I appreciate your comment but you have not understood. The article explains well how you can do it yourself, as I did.

4. Check email, including spam. If you have more problems, contact us by email that appears on your receipt

5. fernanda says:

6. Ha, you missed it.

All template is free the first two weeks after publication, then the download is charged.

: )

7. Artur Castillo says:

It is bad that they sell the templates, I know what cost to do them but good thing we are going to do, the friends of Geofumadas avaces are half hard hahaha. 🙂

Greetings to.

9. Escosoft says:

I would like to pay for many of the plans that are here and I can not

10. Anonymous says:

Where I can download; Templates and much more apparently can not (clear via paypal payment) thanks

11. ROBERTO CORNEJO says:

EXCELLENT! THANK YOU FOR SHARING KNOWLEDGE.
GREETINGS FROM MEXICO.

12. Jose manznao medina says:

Excellent! COMMUNICATION AS A SPACE OF KNOWLEDGE

13. Juan says:

A very useful tool, served me well, thanks friends, greetings from the state of Guanajuato, Mexico

14. Silvina says:

Thank you

15. Paul says:

EXCELLENT TOOL SIRVIO DE MARAVILLA

16. Gerardo says:

Very good template ... excellent work !! regards

This site uses Akismet to reduce spam. Learn how your comment data is processed.